New Items
-
$189.00
+ShippingTired of spending hours assembling and hauling heavy wooden picnic tables? Meet our game-changer: the “Pic-Nick” Table Folding Kit! 🙌 With this kit, you can convert standard wood picnic tables into tool-free, foldable tables that set up and break down in just 60 seconds! It’s designed to work with most […]
-
$399.00
Free ShippingThe Frame Tent Lifting Pole is a great accessory for lifting small frame tents. The super light weight lifting pole can assist in lifting the frame to get legs on without standing on a ladder. Item ships in 2 pieces with easy assembly. Aluminum Construction Orange Powder Coating Dimensions: […]
-
$139.00
+ShippingB&R’s T-Deck Tool is a back saver for your installation crew. Includes 1/2″ drive socket adapter. (BITS SOLD SEPARATELY) Socket bits can store in the main shaft along with the 1/2″ drive adapter. Socket bits are field replaceable from most hardware stores. Choose between a variety of bits for all […]
-
$44.99
+ShippingCOMING SOON! Replacement Socket Adapter with 1/2″ drive (T-Deck tool not included) includes bail pin.
-
$399.00
+Shipping300w self contained Solar Light. Includes electrical pipe bracket and remote. For use with B&R Pole and Base system: Bracket SOL-B is Required. Power: 300w IP65 Charging time: 4-6hrs Working time:10-15 hours Working mode: light induction & remote
-
-
-5% Off
Original price was: $14.99.$14.24Current price is: $14.24.
+ShippingSocket Bit for 1/2″ drive T-Deck Tool. 1/4″
-
Out of Stock
-
$49.95
+ShippingB&R’s T-Deck puller adapter is a back saver for your installation crew. Use to pull flooring decks into place without bending over. Dimensions: 20.50″ Total measurement when inserted to T-Deck tool: 48.5″ Pull tip: 6″ long Pull tip: 3/8″ diameter Use with our T-Deck Tool Stand Up Flooring Tool […]
-
$21.95
+ShippingThis E-track hanger can be used for many different applications including Tent pipes. and ladders. The U-hanger gives you the ability to hang large and small items from your E-track. Use with our Block Leg straps to secure your pipes or ladders (strap not included) Inside dimensions: 9 inch depth […]
-
$49.00
+ShippingThe E-track linen hanger is designed for hangers to be hooked to the cross bar. With this great design, you can hang just about anything you can think of. The bracket has been weight tested to hold 300 lbs; more than enough to hold your apparel or linens. Designed to […]
-
$69.95
+ShippingLighting Cantilever Bracket can attach to any round pipe or truss 1.5″ to 2″ and allow to hang a light or chandelier from the pole. Great for High Peak Frame Tents where there is not a center point to hang a light fixture.
-
$365.00
+ShippingBracket holds up to 2 – 100lb Propane tanks, but can adjust down to hold smaller tanks. (BLOCK NOT INCLUDED) Add this Propane Tank/Cylinder Bracket kit to any Block And Roll® Block to safely store tanks and keep them from tipping over on hard surfaces that can’t be penetrated with […]
-
$69.99
+ShippingBracket to mount 300w Solar Light to B&R Pole and Base or any 2″ pole. **Light not included. Bracket Model SOL-B Aluminum, included 2 set screws.
-
$19.95
+ShippingTent Location Markout flags are perfect to let dig-safe know where your proposed staking will be (White is the color for Proposed excavation) and for your Tent Crew to know installation location. Markout flags have lines to write in name of tent, size and date to keep in the ground […]
-
$149.00
+ShippingAdd this Propane Tank/Cylinder Bracket to any 2″ post or our Pole and Base System components to safely store tanks and keep them from tipping over. Add block post mount, 48″ post and Block And Roll® Block for free standing applications where ground penetration is not allowed/ Bracket attaches to […]